TecnoCooling systems are used with enormous advantages to keep the right climate inside greenhouses of any dimension.
Misting systems (or Fog systems) play an important role in the greenhouse climatic control. TecnoCooling systems are also used with enormous advantages to keep the right temperature and humidity in the environment, under conditions of forced or natural ventilation.
Typically all growers have the problem of low humidity and high temperatures.
Serious problems occur when the humidity in the greenhouse environment drops below 30% RH. Plants will suffer and typically slow or halt the growing process. In fact, many greenhouses in arid conditions close down for the summer months until ambient temperatures will reduce to an acceptable level.
In summertime the quick evaporation of the fog will cool the greenhouse due to the principle of evaporative cooling, meanwhile it humidifies the environment in case of low relative humidity levels.
During the wintertime the system keeps the correct relative humidity level preventing the dehydration of the crops caused by heating systems.
TecnoCooling fog system works on a pressure
of 1000 PSI (70 Bar) and it is designed to
produce water droplets smaller than 5-10
microns diameter that, for theirs dwarfish
size remains suspended in the air for a long
time producing the fog effect.
The environment produced by our system is appropriate for the most delicate crops (ex. the growing of young seedings, the cultivation of tropical plants and in bloom plants) where it is not possible to use traditional spraying methods like standard spraying.
Misting can help to spread fertilizers, anti-parasites and everything you need to spread uniformely.
|
