Air conditioning Precooling

Installing a water mist system to air-cooled chillers improves the efficiency of their working conditions, as the water mist lowers the temperature of the air entering the condenser.

A Condenser Misting System can cut over 30% off the cost of operating your Commercial Air Conditioning System.

AC Pre-Cooling with Misting

Air conditioning systems perform at their worst in hot summer days, just when they are needed the most. The cooling capacity decreases by 14-15% and the power draw increases by 31%. The problem occurs in condensers which has to change vapors refrigerant into liquid forcing the air through the unit and absorbing heat from the refrigerant causing it to condense.

Applying water fogging system to air-cooled chillers can improve the efficiency under most of the working conditions, as the water mist could lower the air temperature entering the condenser.

system efficiency: +30% increased cooling capacity

On typical air-cooled chillers, a reduction in condenser air temperature of 6 °C will result 14% improvement in efficiency and 12°C about 25-30%.


  • Air temperature outside the unit lowered by up to 12 °C
  • Energy consumption decreased, as much as 30%
  • Increase the efficiency of HVAC units up to 30%
  • Live of the whole system extended
  • Low start up and operating costs
  • Quick installation

Looking for more info?

  • Applications
  • Products datasheets
  • Pictures / Installation layouts
  • Data tables and charts